Watch Satellite TV On Your PC

February 23, 2010

Ok i have a router have a cable modem, computer and xbox?

Filed under: cable on computer — admin @ 10:43 am

I am tryign to hook it up so i can have my computer online at the same time i am on xbox live, but for somereason it wont work i have to conenct each one up alone from the modem. yet when i plug it in to the router and plug the 2 cables from the router to the computer and xbox neither of them work. what am i doing wrong?

Cable modems only allow access to a single MAC address. when you plug in a computer to the modem, the modem stores the computer’s MAC address. When you plug the router into the modem, the modem will not work as it is looking for your computers MAC address, and your routers MAC address does not match. For you, there are two fixes.

1. Unplug the power from the cable modem for a good 5 minutes. This is the only way to make a modem ‘forget’ the MAC address it was talking to. Then connect the router to the modem.

Or..

2. Connect your computer to your router. Access the router’s configuration screen on your computer. (Check routers instructions if you don’t know how) One of the settings should include ‘MAC address cloning’. Clone your PC’s MAC address. This will make the MAC address on your router the same as your computer so the modem will now speak to it. Then you can connect the 360 to the router as well and use both the 360 and PC with no issues.

1 Comment »

  1. Cable modems only allow access to a single MAC address. when you plug in a computer to the modem, the modem stores the computer’s MAC address. When you plug the router into the modem, the modem will not work as it is looking for your computers MAC address, and your routers MAC address does not match. For you, there are two fixes.

    1. Unplug the power from the cable modem for a good 5 minutes. This is the only way to make a modem ‘forget’ the MAC address it was talking to. Then connect the router to the modem.

    Or..

    2. Connect your computer to your router. Access the router’s configuration screen on your computer. (Check routers instructions if you don’t know how) One of the settings should include ‘MAC address cloning’. Clone your PC’s MAC address. This will make the MAC address on your router the same as your computer so the modem will now speak to it. Then you can connect the 360 to the router as well and use both the 360 and PC with no issues.
    References :
    http://sacramentocomputerhelp.com/xbox360answers.html

    Comment by Gaming Engineer — February 23, 2010 @ 4:26 pm

RSS feed for comments on this post. TrackBack URL

Leave a comment

Powered by WordPress